What is a Good Sensitivity for Blink Camera? – Best Sensitivity Settings

Blink cameras are smart devices that allow you to monitor your home remotely and receive alerts when motion is detected. However, to get the most out of your blink camera, you need to adjust the sensitivity settings according to your preferences and environment.

In this article, we will explain what blink camera sensitivity is, what it is for, how to adjust it, and what is a good sensitivity level for your blink camera.

What is Blink Camera Sensitivity?

Blink camera sensitivity is a setting that determines how responsive your blink camera is to motion events.

The higher the sensitivity, the more likely your blink camera will detect and record any movement in its field of view. The lower the sensitivity, the less likely your blink camera will be triggered by small or distant motions.

What Is The Blink Camera Sensitivity Setting For?

The sensitivity setting in Blink Camera is important for optimizing the performance and battery life of your Blink camera.

By adjusting the sensitivity, you can control how often your blink camera will send you notifications and record clips. You can also reduce the number of false alarms caused by irrelevant motions such as wind, rain, insects, or pets.

How to Adjust Sensitivity on Blink Camera

Adjusting the sensitivity of your Blink camera is easy and can be done through the Blink app.

Here are the steps you need to follow to change the sensitivity of your Blink Camera:

Blink camera motion sensitivity
  • Open the Blink app.
  • Go to Camera Settings.
  • Under the Motion Detection section, you will see a setting option for Sensitivity.
  • Slide the range to your desired setting.

You can choose from five sensitivity levels: Very Low, Low, Medium, High, and Very High. The default setting is Medium.

What Is a Good Sensitivity for a Blink Camera?

There is no one-size-fits-all answer to this question, as different situations may require different levels of sensitivity. However, here are some general guidelines to help you choose a good sensitivity for your blink camera:

  • If you want to capture every possible motion event and don’t mind receiving frequent notifications and recordings, you can set the sensitivity to High or Very High. This may be suitable for areas with low traffic or high security needs.
  • If you want to balance between capturing important motion events and saving battery life, you can set the sensitivity to Medium. This may be suitable for most indoor and outdoor scenarios.
  • If you want to reduce the number of false alarms and save battery life, you can set the sensitivity to Low or Very Low. This may be suitable for areas with high traffic or low-security needs.

You can also experiment with different sensitivity levels and see how they affect your blink camera’s performance and battery life. You can check the battery level of your blink camera in the Blink app under Device Health.

About The Blink Camera Motion Sensor

The blink camera uses a passive infrared (PIR) sensor to detect motion. A PIR sensor works by measuring the infrared radiation emitted by objects in its field of view.

When an object moves across the sensor’s range, it causes a change in the infrared radiation level, which triggers the sensor.

The PIR sensor has some limitations that you should be aware of:

  • It can only detect motion within a certain distance and angle from the sensor. The maximum distance is about 20 feet (6 meters), and the maximum angle is about 110 degrees horizontally and 57 degrees vertically.
  • It can only detect motion when there is a temperature difference between the moving object and the background. Therefore, it may not work well in extreme hot or cold environments or when the object has a similar temperature as the background.
  • It can be affected by environmental factors such as sunlight, shadows, reflections, or heat sources that may cause false triggers or missed detections.

Blink Camera Motion Detection Range

The motion detection range of your blink camera depends on several factors, such as:

  • The sensitivity setting that you choose.
  • The placement and mounting height of your blink camera.
  • The size and speed of the moving object.
  • The lighting and temperature conditions.

To maximize the motion detection range of your blink camera, you can try these tips:

  • Place your blink camera at least 3 feet (1 meter) above the ground and point it slightly downward.
  • Avoid placing your blink camera near windows, glass doors, mirrors, or other reflective surfaces that may interfere with the PIR sensor.
  • Avoid placing your blink camera near heat sources such as vents, radiators, or fireplaces that may affect the temperature difference between the object and the background.
  • Avoid placing your blink camera in direct sunlight or facing bright lights that may wash out the image quality.

Troubleshooting

If you encounter any problems with your blink camera’s motion detection, such as:

  • My Blink Camera Is Too Sensitive to Movements
  • My Blink Camera Is Not Detecting Motion
  • My Blink Camera Is Recording Too Long or Too Short Clips

You can try these troubleshooting steps:

  • Check the battery level of your blink camera and replace it if needed.
  • Check the Wi-Fi signal strength of your blink camera and move it closer to the sync module or router if needed.
  • Check the firmware version of your blink camera and update it if needed.
  • Check the sensitivity setting of your blink camera and adjust it if needed.
  • Check the placement and angle of your blink camera and reposition it if needed.
  • Check the environmental conditions and remove any potential sources of interference if possible.
  • Contact Blink customer support if the problem persists.

Conclusion

Blink camera sensitivity is a key feature that affects the performance and battery life of your blink camera. By understanding how it works and how to adjust it, you can optimize your blink camera’s motion detection and enjoy an intelligent and secure home monitoring experience.

We hope this article has helped you learn more about blink camera sensitivity and how to choose the best sensitivity settings for your blink camera.

Also Read – Blink Sync Module Authentication Failed – Ways to Fix

Leave a Comment