How to Replace ADT Doorbell Battery? – Battery Replacement Guide

If you have an ADT doorbell camera, you might be wondering how to replace the battery when it runs low. The battery is a vital component of your doorbell camera, as it powers the device and allows it to record and transmit video and audio signals. Without a functioning battery, your doorbell camera will not work properly and might miss important events or alerts.

Replacing the battery of your ADT doorbell camera is not a difficult task. You don’t need any tools or professional help to do this. You can easily replace the ADT doorbell battery yourself by following these simple steps:

If you have a Blink Camera, learn how to replace blink camera batteries.

How to Replace ADT Doorbell Camera Battery?

adt_doorbell_battery

Here are the steps you need to follow to change the ADT doorbell camera battery. The steps are:

  1. Check Your Battery Level in the ADT Pulse App.
  2. Locate the Release Tab for Your Doorbell.
  3. Remove the Doorbell from the Bracket.
  4. Access the Rechargeable Battery Pack.
  5. Charge your ADT Doorbell.
  6. Check the Battery Indicator Light.
  7. Place the Doorbell Back on the Bracket.

ADT Doorbell Battery Replacement Step-by-Step Guide

Now that you know the steps you need to follow to replace adt camera battery, let’s have a look at the explanation of each step.

1. Check Your Battery Level in the ADT Pulse App

The first thing you need to do is to check the battery level of your doorbell camera in the ADT Pulse app. This app lets you monitor and control your home security system from your smartphone or tablet.

To check the battery level of your ADT doorbell, open the app and tap on the doorbell camera icon. You will see a battery indicator that shows how much charge is left.

If the battery level is low, you will see a red icon with an exclamation mark. This means that you need to replace the ADT doorbell battery as soon as possible.

2. Locate the Release Tab for Your Doorbell

The next step is to locate the release tab for your doorbell. This is a small button that you need to press to detach the doorbell from the bracket.

The release tab is located at the bottom of the doorbell, below the camera lens. To access it, you might need to remove the cover plate that surrounds the doorbell. This plate is held by two screws that you can unscrew with a Phillips screwdriver.

3. Remove the Doorbell from the Bracket

Once you have located the release tab, press it and gently pull the doorbell away from the bracket. You might need to wiggle it a bit to loosen it. Be careful not to damage the wires that connect the doorbell to the power source.

4. Access the Rechargeable Battery Pack

After removing the doorbell from the bracket, you will see a rechargeable battery pack inside it. This is a rectangular black box that has a green LED light and a micro-USB port on it. To access it, you need to slide it out of the doorbell. You might need to use a flathead screwdriver to pry it out.

5. Charge your ADT Doorbell

Now that you have removed the battery pack, you need to charge it using a micro-USB cable and a power adapter. You can use any standard micro-USB cable and adapter that you have at home, or you can buy one online or at a local store. Plug one end of the cable into the micro-USB port on the battery pack, and plug the other end into the power adapter. Then plug the adapter into a wall outlet.

6. Check the Battery Indicator Light

While charging, you will see a green LED light on the battery pack. This light indicates how much charge is left in the battery. When the light is solid green, it means that the battery is fully charged. When the light is blinking green, it means that the battery is charging. When the light is off, it means that there is no power or connection.

7. Place the Doorbell Back on the Bracket

Once the battery is fully charged, you need to place it back into the doorbell and attach it to the bracket.

To do this, slide the battery pack into the doorbell until it clicks into place. Then align the doorbell with the bracket and push it until it snaps into place. You might hear a beep sound when this happens.

How to Install Ring Doorbell on Brick without Drilling [Fix]

Conclusion

That’s how you can replace ADT doorbell battery yourself without any hassle. By following these steps, you can ensure that your doorbell camera works properly and keeps your home secure. You can also check your battery level regularly in the ADT Pulse app and charge it when needed.

FAQs

Here are some frequently asked questions about ADT doorbell battery replacement:

  • How often do I need to replace ADT doorbell battery?

The answer depends on how often your doorbell camera records events and how long they last. Generally, a fully charged battery can last up to six months under normal use. However, if your doorbell camera records more events or longer events, then your battery will drain faster and need more frequent charging.

How Long Does Ring Battery Last? [Each Model]

  • How do I know if my ADT doorbell battery is low?

You can check your battery level in two ways: through the ADT Pulse app or through your doorbell itself.

In the app, you will see a battery icon that shows how much charge is left in your doorbell camera. If it is low, you will see a red icon with an exclamation mark. On your doorbell itself, you will see a red LED light flashing when your battery is low.

  • How long does it take to charge ADT doorbell battery?

It takes about four hours to fully charge your ADT doorbell battery using a micro-USB cable and a power adapter.

  • Can I use any micro-USB cable and adapter to charge my ADT doorbell battery?

Yes, you can use any standard micro-USB cable and adapter that you have at home, or you can buy one online or at a local store. However, make sure that the adapter has an output of 5V and 1A, as this is the recommended specification for your doorbell battery.

  • Can I replace ADT doorbell battery with a different type of battery?

No, you should not replace your ADT doorbell battery with a different type of battery, as this might damage your doorbell or cause it to malfunction. You should only use the original rechargeable battery pack that came with your doorbell or a compatible replacement from ADT.

I hope this article was helpful for you. If you have any questions or feedback, please let me know. 😊

Leave a Comment