How to Install Ring Doorbell on Brick without Drilling? Mount Easily

Ring doorbells are great home security tools if you want to see who is at the door. You can also use them to talk to people at the door. To install or mount the ring doorbell, most people have to drill through the brick making a cavity.

Most people hate it and want a solution where they can mount the ring doorbell without drilling a hole. If you also want to know how to install ring doorbell on brick without drilling, then you are at the right place.

In this blog post, we’ll show you four creative ways to attach a Ring doorbell on brick without drilling. We’ll also explain why it’s difficult to install Ring doorbells on brick without drilling and what are the pros and cons of each method.

By the end of this post, you’ll be able to choose the best option for your situation and enjoy the benefits of having a Ring doorbell on your brick wall.

Install Ring Doorbell on Brick Wall

Can You Install a Ring Doorbell on Brick without Drilling?

The short answer is yes, you can install a Ring doorbell on brick without drilling. However, it’s not as easy or straightforward as installing it on other types of surfaces, such as wood or uPVC.

There are some challenges and limitations that you need to be aware of before you decide to go for this option.

Also Read – Ring Floodlight Cam Pro vs. Plus: Choosing the Right Defender for Your Home

Why Is It Difficult Installing Ring Doorbells on Brick Without Drilling?

There are several reasons why installing Ring doorbells on brick without drilling is difficult. Here are some of them:

Surface Nature

Brick is a hard and uneven surface that makes it difficult for adhesives to stick properly. Unlike wood or uPVC, which are smooth and flat, brick has bumps, cracks, and pores that can reduce the contact area and the bonding strength of adhesives.

This means that if you use an adhesive-based method to mount your Ring doorbell on brick, it may not hold securely and may fall off over time or due to weather conditions making it hard to install a ring doorbell.

Also Read – How to Fix a Ring Solar Panel Not Charging: 8 Easy Solutions

Mounting Plate Is Different

Ring doorbells come with a mounting plate that is designed to be screwed into the wall or door frame.

The mounting plate has holes that match the screws that come with the kit. However, if you want to install your Ring doorbell on brick without drilling, you can’t use the mounting plate or the screws.

You need to find an alternative way to attach your Ring doorbell directly to the brick wall, which may not be compatible with the shape or size of your device.

Landlord

If you’re renting your property, you may not have permission to drill holes in the brick wall or siding.

Your landlord may not allow you to make any permanent changes or modifications to the exterior of your home. This means that you need to find a non-invasive method to install your Ring doorbell on brick without drilling, which may not be as secure or reliable as drilling.

4 Creative Ways to Attach Ring Doorbell on Brick Without Drilling

Despite these challenges, there are still some ways that you can install your Ring doorbell on brick without drilling. Here are four creative methods that you can try:

Use a No-drill Mount

Ring Doorbell No Drill Mount

One of the easiest ways to install your Ring doorbell on brick without drilling is to use a no-drill mount. A no-drill mount is a special mounting plate with double-sided adhesive strips to stick your Ring doorbell to smooth, clean surfaces.

Ring offers an official no-drill mount for its second-generation video doorbell, which is perfectly sized and waterproof. However, it’s more expensive than other options and may not work well on textured surfaces like brick.

Alternatively, you can use a third-party no-theft mount that has a metal frame and a locking mechanism that prevents your Ring doorbell from being stolen. This mount is more secure and durable than the official one, but it may not fit all models of Ring doorbells.

To use a no-drill mount for installing a ring doorbell on brick, you need to follow these steps:

  1. First, clean the brick surface where you want to install your Ring doorbell with alcohol or soap and water.
  2. Peel off the protective film from the adhesive strips on the back of the no-drill mount.
  3. Press the no-drill mount firmly against the brick surface for a few minutes.
  4. Wait for a few hours before attaching your Ring doorbell to the no-drill mount.

Voila! You have installed a Ring Doorbell on the Brick Wall without having to make holes in it.

Also Check – Ring Doorbell Not Announcing on Alexa – How to Fix?

The DIY Double-Sided Tape Method

Another way to install your Ring doorbell on brick without drilling is to use a DIY double-sided tape method. This method is similar to the no-drill mount method, but instead of using a special mounting plate to fix the doorbell on the wall, you use a strong and permanent double-sided tape that you can buy from any home improvement store.

The benefit of this method is that it’s cheaper and more flexible than the no-drill mount method. You can use any type of double-sided tape that suits your needs, such as foam tape, acrylic tape, or VHB tape. You can also cut the tape to fit the shape and size of your Ring doorbell.

The downside of this method to install ring doorbell on a brick wall is that it may not be as secure or waterproof as the no-drill mount method.

The tape may lose its adhesion over time or due to weather conditions. It may also damage your Ring doorbell or your brick wall if you try to remove it.

To use the DIY double-sided tape method for installing the ring doorbell, you need to follow these steps:

  1. Clean the brick surface where you want to install your Ring doorbell with alcohol or soap and water.
  2. Cut the double-sided tape to fit the back of your Ring doorbell.
  3. Peel off the protective film from one side of the tape and stick it to the back of your Ring doorbell.
  4. Peel off the protective film from the other side of the tape and press your Ring doorbell firmly against the brick surface for a few minutes.

Anti-Theft Door Mount

Anti Theft Mount to Install Ring Doorbell Without Drilling

A third way to install your Ring doorbell on brick without drilling is to use an anti-theft door mount. An anti-theft door mount is a metal bracket that attaches to the top and bottom edges of your door and holds your Ring doorbell in place.

The advantage of this method is that it’s very secure and easy to install. You don’t need to drill any holes or use any adhesives. You just need to slide the bracket over your door and tighten the screws. The bracket also has a locking mechanism that prevents anyone from removing your Ring doorbell without a key.

The drawback of this method is that it may not work for all types of doors or Ring doorbells. You need to make sure that your door is thick enough and has enough clearance for the bracket. You also need to make sure that your Ring doorbell is compatible with the bracket size and shape.

To use an anti-theft door mount, you need to follow these steps:

  1. Measure the thickness and width of your door and compare it with the specifications of the anti-theft door mount.
  2. If your door and Ring doorbell are compatible, slide the bracket over the top and bottom edges of your door.
  3. Align your Ring doorbell with the bracket holes and insert the screws.
  4. Tighten the screws with a screwdriver and lock them with a key.

Hang a Ring Doorbell with Strips

A fourth way to install your Ring doorbell on brick without drilling is to hang it with strips. This method involves using a hook-and-loop fastener, such as Velcro or Command strips, to hang your Ring doorbell from a nail or a screw on your brick wall.

The benefit of this method is that it’s simple and inexpensive. You don’t need to buy any special mounts or tapes. You just need some strips and a nail or a screw. You can also easily remove your Ring doorbell from the wall if you need to change its batteries or location.

The downside of this method is that it may not be very stable or aesthetically pleasing. Your Ring doorbell may swing or tilt when someone presses it or when there’s wind. It may also look odd hanging from a nail or a screw on your brick wall.

To use this method, you need to follow these steps:

  1. Clean the brick surface where you want to install your Ring doorbell with alcohol or soap and water.
  2. Drill a small hole in the brick wall and insert a nail or a screw.
  3. Attach one side of the strip to the back of your Ring doorbell and the other side to the nail or screw.
  4. Press your Ring doorbell against the nail or screw until it sticks.

Wrap Up | Install Ring Doorbell On Brick Wall

Installing a Ring doorbell on brick without drilling is possible, but it’s not easy. You need to consider the pros and cons of each method and choose the one that suits your needs and preferences.

We hope this blog post has helped you learn how to install a Ring doorbell on a brick without drilling. If you have any questions or comments, feel free to leave them below.

Also Read – How to Unregister Blink Camera Without Account? [Easy Steps]

FAQs

Here are some frequently asked questions about installing a Ring doorbell on brick without drilling:

Can I use glue or epoxy to install my Ring doorbell on brick?

We don’t recommend using glue or epoxy to install your Ring doorbell on brick because they may damage your device or your wall if you try to remove them. They may also not be strong enough to hold your device securely.

Is the Ring Drill Mount Secure?

No, the ring drill mount is not very secure.

Leave a Comment