How To Reset Blink Camera Back To Factory Settings?

Have you ever wished you could erase all the mistakes you made in life and start over? Well, you can’t do that with your life, but you can do that with your Blink camera.

Resetting your Blink camera back to factory settings is a simple way to fix any issues you might have with your device, such as connectivity problems, poor performance, or forgotten passwords.

In this article, we will show you how to reset Blink camera back to factory settings, and also answer some frequently asked questions about this process. But first, let’s see which Blink cameras this works for.

Blink Cameras That This Reset Works For

After reading this article, you will be able to reset these blink cameras:

Blink Indoor (1st and 2nd generation)
Blink Outdoor (1st and 2nd generation)
Blink XT and XT2
Blink Mini

If you have a different model of Blink camera, such as the Blink Video Doorbell or the Blink Floodlight, please refer to the user manual or the Blink support website for specific instructions on how to reset your device.

When to Reset Your Blink Camera?

Resetting your Blink camera back to factory settings is a drastic measure that should only be taken as a last resort. This is because resetting your camera will erase all the data and settings on your device, including your Wi-Fi network, your Blink account, your motion zones, your schedules, your clips, and your live view history.

You will also need to re-pair your camera with your Sync Module (if you have one) and reconfigure your camera settings from scratch.

Therefore, before you decide to reset your Blink camera, you should try some other troubleshooting steps first, such as:

Checking your internet connection and router settings
Updating your Blink app and camera firmware
Rebooting your camera and Sync Module
Moving your camera closer to your router or Sync Module
Replacing your camera batteries
Contacting Blink customer support

If none of these steps resolve your issue, then you can proceed to reset your Blink camera back to factory settings.

Blink Camera Reset Button

All Blink cameras have a small reset button located on the bottom of the device. The reset button is usually hidden under a rubber cover that you need to peel off to access it. You will also need a thin object, such as a paper clip or a needle, to press the reset button.

Blink Mini Reset Button – How To Reset Blink Mini Camera

The Blink Mini is a plug-in camera that does not require a Sync Module to operate. To reset your Blink Mini camera back to factory settings, follow these steps:

Make sure your Blink Mini is plugged in and powered on.
Locate the reset button on the bottom of the camera.
Press and hold the reset button for 10 seconds, until the blue LED on the front of the camera starts blinking rapidly.
Release the reset button and wait for the camera to reboot.
Your Blink Mini should now be back to the factory defaults.

Resetting A Blink Camera Back To Factory Settings

To reset your Blink camera (other than the Blink Mini) back to factory settings, follow these steps:

Prerequisites

Make sure your Blink camera is powered on and has fresh batteries.
Make sure your Blink app is updated to the latest version and you are logged in to your Blink account.
Make sure your Sync Module (if you have one) is plugged in and connected to the internet.
Make sure you have access to the email address associated with your Blink account, as you will need to verify your identity during the reset process.

Locate the reset button on the bottom of the camera.

Peel off the rubber cover to reveal the reset button.
Use a thin object, such as a paper clip or a needle, to press the reset button.

Press and hold the reset button for 30 seconds.

You will hear a beep sound and see a red LED on the front of the camera.
Keep holding the reset button until you hear another beep sound and see a blue LED on the front of the camera.
Release the reset button and wait for the camera to reboot.

Your camera should now be back to the factory defaults.

You will receive an email from Blink asking you to confirm the reset of your camera.
Follow the instructions in the email to verify your identity and complete the reset process.
You will also need to re-pair your camera with your Sync Module (if you have one) and reconfigure your camera settings from scratch.

How To Reset Blink Camera To A New Account

If you want to reset your Blink camera to a new account, you will need to follow the same steps as above, but with some additional steps:

Before you reset your camera, you will need to delete it from your current Blink account. To do this, open the Blink app, tap on the camera you want to delete, tap on the gear icon on the top right corner, and tap on “Delete Device”.

After you reset your camera, you will need to create a new Blink account or log in to a different Blink account. To do this, open the Blink app, tap on “Create Account” or “Log In”, and follow the instructions on the screen.
You will also need to add your camera to your new Blink account. To do this, open the Blink app, tap on the plus icon on the bottom right corner, and follow the instructions on the screen.

Also Check – How to Share Blink Camera Access With Someone?

How To Reset Blink Doorbell

The Blink Video Doorbell is a battery-powered camera that also works as a doorbell. To reset your Blink Video Doorbell back to factory settings, follow these steps:

Make sure your Blink Video Doorbell is powered on and has fresh batteries. Check how to replace blink batteries if they are low.
Locate the reset button on the back of the device, next to the micro USB port.
Press and hold the reset button for 10 seconds, until the blue LED on the front of the device starts blinking rapidly.
Release the reset button and wait for the device to reboot.
Your Blink Video Doorbell should now be back to the factory defaults.

Can You Reset A Blink Camera Remotely?

Unfortunately, you cannot reset a Blink camera remotely. You will need to physically access your camera and press the reset button on the bottom of the device. This is a security feature that prevents unauthorized users from resetting your camera and accessing your data.

How To Reset A Blink Camera Password

If you forget your Blink camera password, you can easily reset it using the Blink app. To reset your Blink camera password, follow these steps:

Open the Blink app and tap on “Forgot Password?” on the login screen.
Enter the email address associated with your Blink account and tap on “Send Reset Link”.

Check your email and open the message from Blink with the subject “Reset your Blink password”.
Tap on the link in the email and enter a new password for your Blink account.
Tap on “Reset Password” and log in to your Blink account with your new password.

FAQ

Do Blink cameras reset after a power outage?

No, Blink cameras do not reset after a power outage. Your camera settings and data will remain intact after a power outage. However, you may need to reconnect your camera to your Wi-Fi network or Sync Module if they lose connection during the power outage.

Conclusion