You turn on your Insignia TV, and you see no display, but the sound is coming in. Well, it is one of the common issues with smart TVs.
So the question is, how to fix Insignia tv no picture but sound error? Well, in most cases, the issue can be fixed by following a few troubleshooting methods only.
Hence, to help you out, I have explained some of the easy ways to help you get rid of the error:
How To Fix Insignia TV No Picture but Sound?
1. Soft Reset Your Insignia TV
The first step in resolving the “Insignia TV no picture but sound” issue is performing a soft reset. Here’s how you can do it:
- Unplug the TV: Start by turning off your Insignia TV and unplugging it from the power source. Let it sit for a minute or two.
- Plug it back in: After a brief pause, plug the TV back in and turn it on. This soft reset can often resolve minor glitches causing the no-picture problem.
2. Check Your HDMI Cable
If the soft reset didn’t work, the next thing to check is your HDMI cable. A faulty or loose connection could be the culprit. Follow these steps:
- Inspect the HDMI cable: Ensure that the HDMI cable connecting your TV to the external device (like a cable box or gaming console) is securely plugged in at both ends.
- Try a different HDMI port: If possible, switch the HDMI cable to a different port on your TV. Sometimes, a particular HDMI port might be malfunctioning.
3. Connect HDMI Cable to Another Port
Still no luck? Let’s try connecting the HDMI cable to another port on your TV:
- Unplug the HDMI cable: Disconnect the HDMI cable from both your TV and the external device.
- Switch ports: Plug the HDMI cable into another HDMI port on your Insignia TV and reconnect it to the external device.
- Turn on the TV: Power on your TV and check if the picture is now visible.
4. Change HDMI Cable and Power Cable
If the issue persists, it’s time to consider changing the HDMI cable and the power cable:
- Replace the HDMI cable: Sometimes, HDMI cables can deteriorate over time, leading to connection problems. Try using a new HDMI cable to see if that resolves the issue.
- Swap the power cable: Similarly, if the power cable is damaged or malfunctioning, it can affect your TV’s performance. Swap it with a working power cable to rule out this possibility.
5. Hardware Reset the Insignia TV
When all else fails, a hardware reset might be necessary:
- Locate the reset button: On the back or side of your Insignia TV, you’ll find a reset button. It’s typically a small, recessed button.
- Press and hold: Use a paperclip or a similar tool to press and hold the reset button for about 15 seconds.
- Release the button: After holding it for the specified time, release the reset button. Your TV will restart.
- Check for picture: Once the TV reboots, check if the picture is back. This reset should clear any deep-seated issues.
6. Contact Insignia TV Support
If none of the above steps resolve the problem, it’s advisable to reach out to Insignia TV support. They have a dedicated team of experts who can provide further assistance and possibly schedule a service appointment if needed.
So that was all for how to fix Insignia TV no picture but sound. In case, even after trying all the above methods, your TV still fails to work, then it’s probably time to buy a new TV. However, before you do that, you might want to talk to a local technician and see if there is anything to do with hardware changes.